Use and Care Manual

Fig.6: Insert big top slanting beam (C) to Top slanting beam connector (F).
Fig.7: Secure hook (O) to big roof connector (H), insert Big top slanting beam (C) and top middle beam
(D1, D2) to Big roof connector (H).
Fig.7-1: Insert top middle beam (D1, D2) top middle beam connector (G1, G2)
Fig.8: Insert Small top beam (E) to Small roof connector (I), Cover the small roof with Small canopy (P)
Fig.9: Cover the big roof with big canopy (Q), do not
spread it out. Fasten the assembled small roof on Big
top slanting beam (C) with screw (FF), flat washer
(BB) and nut (EE)