Assembly Instruction D-GZ013PCO
Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to finish. The final product will be a quality piece that will go together smoothly and give years of enjoyment. Please read instructions thoroughly before assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations to assure safe and proper assembly. Periodically check all bolted connections on your gazebo to make sure they are tight and secure.
Parts List Short screen (1) A1 2 Short screen (2) A2 2 Long screen (1) B1 2 Long screen (2) B2 2 Big top slanting beam C 4 Top middle beam (Long) D1 2 Top middle beam (Short) D2 2 Small top beam E 4 Top slanting beam connector Top middle beam connector Top middle beam connector F 4 G1 2 G2 2 Big roof connector H 1 Small roof connector I 1 Corner decorative part J 4 Post K 4 Base L 4 Base protector M 4 N1 4 N2 4 O 1 Small canopy P 1 Big canopy Q 1
Hardware Pack 1 AA 1/4"-20*0.6 Screw 36 PCS BB Φ1/4" Flat Washer 72PCS CC 1/4"-20*0.6 Bolt 20 PCS DD 1/4"-20*0.
Fig.1: Slip base protector (M) over post (K) and connect base (L) and post (K) with screw (AA) and flat washer (BB). Fig.2: Attach Corner decorative part (J) and Top slanting beam connector (F) to post (K) with screw (AA) and flat washer (BB). Fig.3: Insert screen(1) A1 to screen(2) A2,tighten with bolt (CC) and flat washer (BB), then secure middle top beam connector (G2) between screen(A1) and screen (A2).(Copy above step to assemble screen (B1), screen B2 and middle top beam connector (G1).) Fig.
Fig.6: Insert big top slanting beam (C) to Top slanting beam connector (F). Fig.7: Secure hook (O) to big roof connector (H), insert Big top slanting beam (C) and top middle beam (D1, D2) to Big roof connector (H). Fig.7-1: Insert top middle beam (D1, D2) top middle beam connector (G1, G2) Fig.8: Insert Small top beam (E) to Small roof connector (I), Cover the small roof with Small canopy (P) Fig.9: Cover the big roof with big canopy (Q), do not spread it out.
Hardware Pack 3 GG Plastic ring 52 PCS HH Φ5/16"*7.125 stake 16 PCS Fig.10: Spread out big canopy (Q), attach hook of big canopy (Q) to the hole of screen. Fig.11: Use Plastic ring (GG) to hand the mosquito net (R) to mosquito netting bar (N1, N2) Fig.12: Lift base (M), and secure the assembled gazebo to the ground using stake.
Limited Warranty: This limited warranty is extended to the original purchaser and applies to defects in materials and workmanship of your item provided the item is maintained with care and used only for personal, residential purposes. The item is warranted to be free from defects in material or workmanship for a period of 6 months. We don't reimburse for transportation or delivery costs, or compensate the individual or any outside party for assembling or disassembling the product.
