User`s manual

___________________________________________________________________________________
27
Advanced Settings
User can control RS-232 communication in Advanced Port Control page
through “Advanced” settings.
Clock Rate
This is the “Data Rate" value for on board crystal frequency of input clock. The
baud rate can optionally be adjusted according to the data rate required. The
clock pre-divisor is used to divide the input clock prior to baud rate generation.
This parameter must matches with the oscillator (crystal) frequency on the
board. System default is 14745600 Hz. We do NOT recommend for
modification without SUNIX instruction. User can click “Defaults” button back
to manufactory settings.