Safety Information

Issue Date:
Page 2 of 3
Report Reference #
E314798-A5-UL
 The product was submitted and evaluated for use at the maximum ambient temperature (Tma)
permitted by the manufacturer’s specification of: 60 degree C
 The following circuit locations (with circuit/schematic designation) were investigated as a limited
power source (LPS): output port (CN1, CN2, CN3)
Engineering Conditions of Acceptability
For use only in or with complete equipment where the acceptability of the combination is determined by UL
LLC. When installed in an end-product, consideration must be given to the following:
 The following secondary output circuits are SELV: output port (CN1, CN2, CN3)
 The following secondary output circuits are at non-hazardous energy levels: output port (CN1, CN2,
CN3)
 The power supply terminals and/or connectors are: Suitable for factory wiring only
 The investigated Pollution Degree is: 2
 The following end-product enclosures are required: Mechanical, Fire
 Consideration shall be given to conduct limited power source, heating test and as part of the end
product investigation.
Additional Information
N/A
Markings and instructions
Clause Title
Marking or Instruction Details
Power rating - Company
identification
Listee's or Recognized company's name, Trade Name, Trademark or File
Number
Power rating -
Model
Model Number
Special Instructions to UL Representative
N/A