Safety Information

Issue Date:
Page 23 of 36
Report Reference #
E314798-A5-UL
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
5
ELECTRICAL REQUIREMENTS AND SIMULATED ABNORMAL CONDITIONS
Pass
5.1
Touch current and protective conductor current
N/A
5.1.1
General
No direct connection to mains.
N/A
5.1.2
Configuration of equipment under test (EUT)
N/A
5.1.2.1
Single connection to an a.c. mains supply
N/A
5.1.2.2
Redundant multiple connections to an a.c. mains
supply
N/A
5.1.2.3
Simultaneous multiple connections to an a.c. mains
supply
N/A
5.1.3
Test circuit
N/A
5.1.4
Application of measuring instrument
N/A
5.1.5
Test procedure
N/A
5.1.6
Test measurements
N/A
Supply voltage (V) .................................... :
-
Measured touch current (mA) ................... :
-
Max. allowed touch current (mA) .............. :
-
Measured protective conductor current
(mA) ......................................................... :
-
Max. allowed protective conductor current
(mA) ......................................................... :
-
5.1.7
Equipment with touch current exceeding 3,5 mA
N/A
5.1.7.1
General .................................................... :
N/A
5.1.7.2
Simultaneous multiple connections to the supply
N/A
5.1.8
Touch currents to telecommunication networks and
cable distribution systems and from
telecommunication networks
N/A
5.1.8.1
Limitation of the touch current to a
telecommunication network or to a cable
distribution system
N/A
Supply voltage (V) .................................... :
-
Measured touch current (mA) ................... :
-
Max. allowed touch current (mA) .............. :
-
5.1.8.2
Summation of touch currents from
N/A