Safety Information

Issue Date:
Page 13 of 36
Report Reference #
E314798-A5-UL
IEC 60950-1
Clause
Requirement + Test
Result - Remark
Verdict
2.10.5.11
Insulation in wound components
N/A
2.10.5.12
Wire in wound components
N/A
Working voltage ....................................... :
N/A
a) Basic insulation not under stress ......... :
N/A
b) Basic, supplementary, reinforced
insulation .................................................. :
N/A
c) Compliance with Annex U .................... :
N/A
Two wires in contact inside wound
component; angle between 45° and 90° .. :
N/A
2.10.5.13
Wire with solvent-based enamel in wound
components
N/A
Electric strength test ................................. :
-
Routine test
N/A
2.10.5.14
Additional insulation in wound components
N/A
Working voltage ....................................... :
N/A
- Basic insulation not under stress ........... :
N/A
- Supplementary, reinforced insulation ..... :
N/A
2.10.6
Construction of printed boards
Pass
2.10.6.1
Uncoated printed boards
Pass
2.10.6.2
Coated printed boards
No coated printed boards.
N/A
2.10.6.3
Insulation between conductors on the same inner
surface of a printed board
N/A
2.10.6.4
Insulation between conductors on different layers
of a printed board
N/A
Distance through insulation
N/A
Number of insulation layers (pcs) ............. :
N/A
2.10.7
Component external terminations
N/A
2.10.8
Tests on coated printed boards and coated
components
N/A
2.10.8.1
Sample preparation and preliminary inspection
N/A
2.10.8.2
Thermal conditioning
N/A
2.10.8.3
Electric strength test
N/A