Owners manual

6
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 90 minutes
Tools Required for Assembly (not included):
Phillips screwdriver w/ medium blade. Leak Detection Solution. Step Ladder.
ASSEMBLY INSTRUCTIONS
1.Insert the hoods of bottom plate (O) to the
lower holes of the three lower supports (K)
Insert the hoods of control box assembly (J)
to the upper holes of the three lower
support (K).
Note: Make sure holes align the side of bottom
plate (O) with the holes with the side of control
box assembly (J) with the magnet.
2.Insert three upper supports (E) to the three
lower supports (K).