Owners manual

10
ASSEMBLY INSTRUCTIONS
9. Use Phillips screwdriver (LL) to install
side panels (H) to bottom of assembly with
M5 x 12 mm screws (DD).
Note: Do not cover the panel where the
magnet is.
Hardware Used
10.Install the knob (GG) to M4x10 screw (HH).
Hang the chain (II) to the hole on the control
box assembly (J) and put the pothook of front
panel to the holes of bottom plate.
Hardware Used
M5 x 12 mm Screw
Phillips
Screwdriver
Knob
Screw M4 X 10
Chain
Philips
screwdriver