Spec Sheet

17
tube from the heater and wash and clear. After that assembly the glass tube and the rest of
parts.
Note: In a salt-air environment (such as near an ocean), corrosion occurs more quickly than
normal. Frequently check for corroded areas and repair them promptly.
TIP:
Use high-quality automobile wax to help maintain the appearance of
your heater. Apply to exterior surfaces from the pole down. Do not
apply to emitter screen or domes.
Storage
 Between uses:
 Turn Control Knob OFF.
 Disconnect LP cylinder.
 Store heater upright in an area sheltered from direct contact with inclement weather (such as
rain, sleet, hail, snow, dust and debris).
 If desired, cover heater to protect exterior surfaces and to help prevent build-up in air
passages.
Note: Wait until heater is cool before covering.
During periods of extended inactivity or when transporting:
 Turn Control Knob OFF.
 Disconnect LP cylinder and move to a secure, well-ventilated location outdoors.
 Store heater upright in an area sheltered from direct contact with inclement weather (such as
rain, sleet, hail, snow, dust and debris).
 If desired, cover heater to protect exterior surfaces and to help prevent build-up in air
passages.
 Never leave LP cylinder exposed to direct sunlight or excessive heat.
Note: Wait until heater is cool before covering.
Service
Only a qualified service person should repair gas passages and associated components.
Caution: Always allow heater to cool before attempting service.
ANS Z83.26-2007/CSA 2.37-2007 Gas-Fired Outdoor Infrared Patio Heaters
ANS Z83.26a-2008/CSA 2.37a-2008 Gas-Fired Outdoor Infrared Patio Heater