User Manual

6
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents above. If any part is missing or damaged, do not
attempt to assemble the product. Contact customer service for replacement parts.
WARNING – Metal may be sharp. Please wear gloves during assembly.
Estimated Assembly Time: 90 minutes
Tools Required for Assembly (not included):
Phillips screwdriver w/ medium blade, leak detection solution, step ladder
ASSEMBLY INSTRUCTIONS
1. Line up holes on the bracket of wheel assembly (O)
with the corresponding holes on base (M), then insert
M8 x 16 mm bolts (BB) through holes. Hand tighten with
M8 flange nuts (AA). Be sure the wheel assembly (O) is
parallel to the base (M).
Secure the wheel axles on the side face
of the main frame with 4pcs M6X12 bolts. Put
the wheels through the axles, and then put
2pcs Φ8 washers (DD), firm up the wheels with
2pcs M8 nuts (NN).
Note: To improve stability, the preassembled bucket (N)
can be filled with sand (not included).
Hardware Used
2. Attach cylinder housing (H) loosely to
base (M) with M5 x 8 mm screws (CC).
Hardware Used
M8 Flange Nut
M8 x 16 mm
Bolts
M5 x 8 mm Screw