User Manual

ASSEMBLY INSTRUCTIONS
6
1
1. Attach post with burner assembly (G) onto heater
housing (H), using four 3/16 in. Stainless bolts (FF) .
Keep the access panel (D) open.
G
Hardware Used
FF
FF
3/16 in. Stainless Screw
x 4
D
H
2. Attach ring weight (F) to base (E) , using four
2
M6 X 20 bolts.
G
Hardware Used
H
EE
M6 X 20 Bolts
x 4
E
F
EE
3. Put three reflector spacers (BB) into the holes in the
3
BB
emitter (B). Use three nuts (DD) to hold the reflector
spacers inside of the emitter (B). Attach emitter (B) to
B
(G) using four bolts (FF).
DD
FF
Hardware Used
BB
Reflector spacers x 3
G
DD
Nuts x 3
FF 3/16 in. Stainless Screw
x 4
3