Manualshelf

Owner’s Manual

ManualsBrandsSunheat International ManualsOutdoor LivingUmbrella Propane Patio Heater With 46000 BTU, 18 ft Heating Diameter, up to 10 Hour Run Time, Push Button Ignition, in Black Finish
12345678910
ASSEMBLY
1.
Attach the Support Brackets to the Base. Attach the 3 - Support Brackets
loosely to the Base with 3 - Medium Bolts inserted through the holes in the
bottom of the Support Brackets and into the Base.
Hardware Used
:3MediumBolts
Hardware Used
:
6LargeBolts
6SmallFlangeNuts
- 7 -
2.
Attach the Post to the Support Brackets. Once you have tightened the bolts holding the
Support Brackets to the Base, align the holes in the bottom of the Post
with the holes on the tops of the Support Brackets and insert 6 - Large
Bolts through the hole in the Post and through the hole in the Support
Bracket. Affix 6 - Small Flange Nuts to the bottom of the Large Bolts.
Hand tighten initially then tighten with a wrench when all bolts have
been inserted.