User's Manual
Table Of Contents
- 1 About this Manual
- 2 Safety Instructions
- 3 Product Introduction
- 4 Installation Flow
- 5 Unpacking and Storage
- 6 Mechanical Installation
- 7 Electrical Connection
- 7.1 Safety Instructions
- 7.2 Port Introduction
- 7.3 Overview
- 7.4 Connecting to the Inverter
- 7.5 Connecting to the Meteo Station
- 7.6 Connecting to the Energy Meter
- 7.7 Wiring of DI Signal
- 7.8 Wiring of DO Signal
- 7.9 Wiring of AI Signal
- 7.10 Wiring of PT Signal
- 7.11 Connecting to the Remote Monitoring Device
- 7.12 Connecting to the AC Power Supply
- 7.13 Connecting to the DC Power Supply
- 7.14 Earthing Connection
- 8 Commissioning
- 9 Web Interface
- 9.1 Running Requirements
- 9.2 Login Steps
- 9.3 Web Main Interface
- 9.4 Operation Procedure
- 9.5 Overview
- 9.6 Device Monitoring
- 9.7 Device Maintenance
- 9.8 History Data
- 9.9 System
- 9.9.1 Running Information
- 9.9.2 System upgrade
- 9.9.3 Log export
- 9.9.4 Rebooting
- 9.9.5 Reset all setting
- 9.9.6 Remote Maintenance
- 9.9.7 Message Export
- 9.9.8 System Time
- 9.9.9 Forwarding Configuration
- 9.9.10 IEC104
- 9.9.11 MODBUS
- 9.9.12 Third-party portal
- 9.9.13 Forward GOOSE Service Configuration
- 9.9.14 Interface
- 9.9.15 MPLC
- 9.9.16 More
- 9.9.17 About
- 10 Grid Dispatching
- 11 Maintenance
- 12 Troubleshooting
- 13 FAQ
- 14 Appendix A: Technical Data
- 15 Appendix B: Related Drawings
- 16 Appendix C: General Information
52
step 2 Click "Add device", select a device type in the pop-up window, and fill in the information
required.
step 3 Click "Save".
-- -- EEnndd
9.7.1.5 Edit device
step 1 Click "Device" -> "Device list" to enter the corresponding interface.
step 2 Click the button
in the operation bar, to modify the name of the device connected to
the Logger4000 and other parameters.
step 3 Click "Save".
-- -- EEnndd
The "Device Name" is named in the form device model (port number-
communication address).
Take SG36KTL-M (COM1-7) as an example. SG36KTL-M is device type,
COM1 is the communication port, and 7 is the communication address.
9.7.1.6 Delete device
After a device is deleted on site, the user can delete the device from the device list, to
keep device consistency.
step 1 Click "Device" -> "Device list" to enter the corresponding interface.
step 2 Select the device to be deleted, click the button "Delete".
step 3 Click "Confirm" in the pop-up window, to delete the device.
-- -- EEnndd
9.7.2 Firmware Update
The firmware update function is used to upgrade the SUNGROW residential inverter and
string inverter.
step 1 Click "Device" -> "Firmware update" to enter the corresponding interface.
step 2 Click the button "Select a firmware file". Click "Local Upgrade Package" or "Online
Upgrade Package" to select the upgrade file. Click "Open" to import the upgrade file,
and matching devices are displayed.
step 3 Select the device to be upgraded, and click “Upgrade”.
step 4 Complete firmware update to view current version, target version, start time, end time
and other information.
-- -- EEnndd
9 Web Interface User Manual