User's Manual
Table Of Contents
- 1 About this Manual
- 2 Safety Instructions
- 3 Product Introduction
- 4 Installation Flow
- 5 Unpacking and Storage
- 6 Mechanical Installation
- 7 Electrical Connection
- 7.1 Safety Instructions
- 7.2 Port Introduction
- 7.3 Overview
- 7.4 Connecting to the Inverter
- 7.5 Connecting to the Meteo Station
- 7.6 Connecting to the Energy Meter
- 7.7 Wiring of DI Signal
- 7.8 Wiring of DO Signal
- 7.9 Wiring of AI Signal
- 7.10 Wiring of PT Signal
- 7.11 Connecting to the Remote Monitoring Device
- 7.12 Connecting to the AC Power Supply
- 7.13 Connecting to the DC Power Supply
- 7.14 Earthing Connection
- 8 Commissioning
- 9 Web Interface
- 9.1 Running Requirements
- 9.2 Login Steps
- 9.3 Web Main Interface
- 9.4 Operation Procedure
- 9.5 Overview
- 9.6 Device Monitoring
- 9.7 Device Maintenance
- 9.8 History Data
- 9.9 System
- 9.9.1 Running Information
- 9.9.2 System upgrade
- 9.9.3 Log export
- 9.9.4 Rebooting
- 9.9.5 Reset all setting
- 9.9.6 Remote Maintenance
- 9.9.7 Message Export
- 9.9.8 System Time
- 9.9.9 Forwarding Configuration
- 9.9.10 IEC104
- 9.9.11 MODBUS
- 9.9.12 Third-party portal
- 9.9.13 Forward GOOSE Service Configuration
- 9.9.14 Interface
- 9.9.15 MPLC
- 9.9.16 More
- 9.9.17 About
- 10 Grid Dispatching
- 11 Maintenance
- 12 Troubleshooting
- 13 FAQ
- 14 Appendix A: Technical Data
- 15 Appendix B: Related Drawings
- 16 Appendix C: General Information
47
• Transfer configuration
Transfer the data connected by the system to the background. Refer to the
chapter"9.9.9 Forwarding Configuration", "9.9.10 IEC104", "9.9.11 MODBUS",
"9.9.12 Third-party portal","9.9.13 Forward GOOSE Service Configuration".
• System maintenance
Support of operations such as system upgrade, log export, and rebooting. Refer to
the chapter"9.9 System".
PPVV--ppllaanntt VVaalluuee
Information such as today yield, total yield, real-time active power, and number of offline
devices can be viewed.
Click the button "Exp." to view more information.
IInnvveerrtteerr rreeaallttiimmee vvaalluueess
Information on the inverter such as state, daily yield, active power, and reactive can be
viewed.
9.5.2 Current Alarms
Click "Overview" -> "Current alarms" to view the device fault information.
Information such as device name, alarm name, alarm type, alarm time, fault code, and
fault ID can be viewed.
9.6 Device Monitoring
Click "Device Monitoring" to enter the corresponding interface.
Device information such as real-time values, DC data, initial parameter, protection
parameter, general parameter, device instruction and device information can be viewed
on this interface.
9.6.1 RealTime Values
Realtime information such as power generation, device state, and active power can be
viewed on this interface.
step 1 Click "Device Monitoring" -> "Realtime values" to view the corresponding information.
step 2 Click
to select needed device type in the drop-down list.
step 3 Select a device in the device list and view its real-time data on the right.
-- -- EEnndd
9.6.2 DC Data
step 1 Click "Device Monitoring" -> "DC data" to view the corresponding information.
step 2 Click
to select needed device type in the drop-down list.
User Manual 9 Web Interface