User's Manual

Table Of Contents
31
step 3 Assemble proper cord end terminals to communication cable whose protective layer
and insulation layer are stripped off and crimp them with a crimping tool.
step 4 Connect the cable to the RS485 port of the Logger4000, as shown in the figure below.
-- -- EEnndd
7.6 Connecting to the Energy Meter
The Logger can be connected to the energy meter through the RS485 port or the
Ethernet port. Specifically, refer to the table below.
EEnneerrggyy
MMeetteerr
CCoommmmuunniiccaatt--
iioonn PPoorrtt
PPoorrtt
DDeeffiinniittiioonn
PPrroottooccooll
TTyyppee
WWiirriinngg MMeetthhoodd
Wasion
24 RS485-A
Modbus
RTU
"7.6.1 RS485 Cable
Connection"
25 RS485-B
26 Public
27 RS485-A
28 RS485-B
Acrel
21 RS485-A
Modbus
RTU
"7.6.1 RS485 Cable
Connection"
22 RS485-B
Weidmull-
er
EM610
17 RS485-A
Modbus
RTU
"7.6.1 RS485 Cable
Connection"
16 RS485-B
User Manual 7 Electrical Connection