Installation Guide

40
[W2] x 1 [S3]+[S4] x 7
ROOF PANELS 3
BACK
[W2]
Some key points:
1. Place the [W2]-3 so that the L-channel points to the Left wall (not your left hand) of the shed. This [W2]-3 is placed above the [W1]-1. –
1, -2, -3 indicates the order of roof panel.
2. Seven sets of [S3]+[S4] are used, four sets for nailing [W1] and three for roof panel stacking. The top two sets ①② are the most
important and should be xed rst. The ve screws holes left can be xed in whatever order.
3. The screw holes on the very edge of the ribs are not used in this step.
[W1]-1 [W1]-2[W2]-3
L-Channel
Right Wall
Left Wall