Installation Guide

39
[W1] x 1 [S3]+[S4] x 4
ROOF PANELS 2
BACK
L-Channel
[W1]
This step is similar to last step. Some key points:
1. Place the [W1] so that the L-channel points to the outside of the shed, not inside. This is important.
2. Only four sets of [S3]+[S4] are used. The order of xing these four sets are irrelevant, but you need to make sure that the [S3] are indeed
going into the screw holes on the triangular/rectangular panel or top frames.
3. The ten Screw holes on the ribs are not used in this step.
L-Channel