Installation Guide

[W1] x 1 [S3]+[S4] x 4

ROOF PANELS 1

BACK

L-Channel

[W1]

Start from this [W1] rst. Some key points:

1. Place the [W1] so that the L-channel points to the

outside of the shed, not inside. This is important.

2. Only four sets of [S3]+[S4] are used. The order of xing

these four sets are irrelevant, but you need to make

sure that the [S3] are indeed going into the screw

holes on the triangular/rectangular panel or top

frames.

3. The ten Screw holes on the ribs are not used in this

step.

For better visibility, wall panels and bases are hidden in the roof panel steps.