Installation Guide

23
GENERAL RULES
GENERAL RULES: Single Wall Panel Nailing
This illustration is taken from step [2.6]
As stated before, a wall panel has no predetermined
top/bottom end. It’s up to you to decide which end is
the top or bottom. Once you have made the decision,
follow the rules below.
1. Start from the screw holes at the bottom end.
2. At each end, start from the peripheral screw
holes and move to the screw hole in the middle.
Take the [Q3] on the left for example, ①~⑧ is the
correct order of xing screw holes.
You don’t have to memorize the exact order of xing
these screw holes because detailed order will be
illustrated in the following steps. This page serves as a
reminder.
These rules might sound arbitrary but they are
necessary.
[Q2] is quite special because all the screw holes at the
bottom end have already been xed.
Right
stacking
[Q3]
① ③ ④ ②
⑤ ⑦ ⑧ ⑥