Operation Manual
Table Of Contents
- 1 Introduction
- 2 Before you begin
- 3 Operating the navigation software
- 4 Navigation
- 5 Managing Destinations
- 6 Routes with stages
- 7 Options
- 8 Working with the map
- 9 Useful functions
- 10 Configuring SUNGOO Mobile Navigation 35.01
- 11 Appendix
- 12 Index

User's manual SUNGOO Mobile Navigation 35.01
- 32 - Options
► Wait until GPS reception is sufficient for determining position, the
route will be recalculated and you can begin navigation.
► Tap the Cancel button. The MAIN WINDOW opens. The destination is
saved to the L
AST DESTINATIONS list.
7 Options
Some windows offer options that lead to further functions.
► Tap the Options button to open the options list.
► Tap the option you would like to execute.
► If you would like to quit the options list without selecting an option,
tap the Options
button again.
Delete All
: Deletes all destinations from the LAST DESTINATIONS list. The list is
then empty. A dialog window prompts you to confirm deletion.
Save as Favourite
: Saves the specified destination to the FAVOURITES list.
For more detailed information, please refer to chapter "
Saving a
destination" on page
27.
Show on Map
: Shows the specified address on the map.
Settings
: Opens the SETTINGS window. Here you can configure the navigation
system.
For more detailed information, please refer to chapter "
Configuring " on
page
44.
Logbook
: Opens the LOGBOOK window. Here you can begin and end logbook
recording.
For detailed information, please refer to chapter "
Logbook" on page 44.
Saved Routes
: Opens a dialog window in which you can load a stored route.
GPS status
: Opens the GPS STATUS window. Here you can see details
regarding GPS reception. You can also save data regarding the current
location.
For more detailed information, please refer to chapter "GPS status" on
page
41.
Home Address
: Saves the selected destination as your home address. You can
then begin navigation to this destination very quickly by tapping the
Take Me Home
button in the MAIN WINDOW.
Touchscreen Calibration
: Opens a window in which you can recalibrate the
touchscreen (realign) should it react imprecisely to touch.
Show Map
: Opens the map in Destination search mode. Here you can
determine your navigation destination directly on the map.