Operation Manual
Table Of Contents
- 1 Introduction
- 2 Before you begin
- 3 Operating the navigation software
- 4 Navigation
- 5 Managing Destinations
- 6 Routes with stages
- 7 Options
- 8 Working with the map
- 9 Useful functions
- 10 Configuring SUNGOO Mobile Navigation 35.01
- 11 Appendix
- 12 Index
User's manual SUNGOO Mobile Navigation 35.01
Navigation - 19 -
Opening the Main Window
The MAIN WINDOW opens when the navigation software starts.
If another window is open, tap the
(Back) button. The previous
window will open.
Tap the
(Back) button repeatedly, until the MAIN WINDOW opens.
4.2 Specifying a new destination
New destinations for the SUNGOO Mobile Navigation are all
destinations that you have not yet navigated, or you have not yet
stored.
You can enter an address here, select a special destination, or select a
destination from the quick search function.
When you enter a new destination for the first time, the C
OVERED
COUNTRIES
list opens.
Tap on the country in which your destination lies.
4.2.1 Specifying the destination country
Above the right-hand upper corner of the uppermost entry field of the
A
DDRESS, POI IN A CITY, and POI OF NATIONAL SIGNIFICANCE windows,
is the Country
button. It shows the country code of the country from
which navigation destinations can currently be entered.
If your destination is in a different country, then proceed as follows:
1. Tap the Country
button.
The C
OVERED COUNTRIES list opens.
2. Tap on the country in which your destination lies.
The C
OVERED COUNTRIES list closes again.
The symbol will display the country code of the destination country.
Note: Only countries of which at least a part is represented on the
currently loaded map may be selected.
4.2.2 Destination address
1. In the MAIN WINDOW, tap on New Destination > Enter an Address.
The I
NPUT SEQUENCE menu opens when you enter addresses for
the USA or Canada (and the corresponding map has been
selected).