Operation Manual
Table Of Contents
- 1 Introduction
- 2 Before you begin
- 3 Operating the navigation software
- 4 Navigation
- 5 Managing Destinations
- 6 Routes with stages
- 7 Options
- 8 Working with the map
- 9 Useful functions
- 10 Configuring SUNGOO Mobile Navigation 35.01
- 11 Appendix
- 12 Index

User's manual SUNGOO Mobile Navigation 35.01
Operating the navigation software - 15 -
GPS Ready: Data is being received from at least three satellites.
Position can be calculated.
For more detailed information regarding GPS status, please refer to
chapter "GPS status" on page
41.
Energy
The Energy symbol can display the following conditions of the built-in
battery:
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
Direction
The Direction symbol shows you in which direction you are currently
heading. It can show the following points of the compass: N, NE, E, SE,
S, SW, W and NW.
TMC (Traffic Information)
The SUNGOO Mobile Navigation has an integrated TMC-receiver
which provides the navigation system with up to date traffic messaging.
If necessary, it can alter the route dynamically in order to avoid a traffic
jam for example.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC symbol can display the following TMC-reception status:
No Symbol
: There is no TMC receiver connected, or the connected or
built-in TMC receiver is not operational.
Tuning: The TMC-receiver is operational, but cannot find a station that
is transmitting TMC signals.
TMC on Standby: Traffic messages can be received.