Operation Manual
Table Of Contents
- 1 Introduction
- 2 Before you begin
- 3 Operating the navigation software
- 4 Navigation
- 5 Managing Destinations
- 6 Routes with stages
- 7 Options
- 8 Working with the map
- 9 Useful functions
- 10 Configuring SUNGOO Mobile Navigation 35.01
- 11 Appendix
- 12 Index
User's manual SUNGOO Mobile Navigation 35.01
- 10 - Before you begin
Assembling the cradle
► Assemble the cradle as shown in the diagram. No tools are required
for this.
Securing the cradle
1. Clean that part of the windscreen to which you would like to secure
the cradle. The windscreen must be dry and free of dirt and grease.
2. Place the suction cup of the cradle provided against the
windscreen.
3. Press the lever on the suction cup towards the windscreen.
Securing the navigation device to the cradle
► Insert the navigation device into the cradle by first placing it on the
lower projections and then tilting it backward slightly until the latch
clicks into place.