User Manual

17
If the monitor displays colored texts w ith a black background after booting, and that is in
console. You can just use this as a terminal (but not recommend for beginners), or change
the option for automatically loading a graphic user interface (GUI). To activate GUI , you
can type in startx w ith the keyboard and press Enter, and to always boot up to GUI, type
in sudo raspi-config and go through Boot Options > Desktop/Desk Autologin, and reboot.
Wait for a while and the GUI display will show up as below.
Note:
The screen monitor shown above is the 7 inch one we're using, available on our website
www.sunfounder.com and our Amazon store. Check out now and use your Raspberry Pi
in a most convenient way.
3. Now click the icon of Terminal on the screen, or press CTRL+ALT+T simultaneously.
SunFounder