User Guide

56
After modification, save the file and select Run -> Run Module.
For Linux users:
Open another terminal again. But DO NOT log into the Raspberry Pi remotely in this terminal.
Go to the client with cd and edit the file client.py:
Similar to changes in calibration, change the IP address in client program in your PC:
After the alteration, press Ctrl + O and save and Ctrl + X to exit.
Then run the client program:
sudo python client_App.py
No matter what system your computer is running on, Linux or Windows, when you run the
client_App.py, the following window will appear on your screen:
SunFounder