Manualshelf

Data Sheet

ManualsBrandsSunfounder ManualsMisc. Electronic Experimentation KitsSunFounder DIY Bionic Robot Lizard
21222324252627282930
www.sunfounder.com
26
4) After inserting, use M2.5 x 10mm screw and M2.5 nut to fix it.
5) Connect the acrylic plate 10, 6 and 14 with M3 x 12mm screw and M3 self-locking nut.
6) Tighten the other screw and nut. Note：Self-locking screw do not need to be tightened
too much, as it need to swing.
SunFounder