Data Sheet

www.sunfounder.com
15
3) Connect these two components with an
M2.5x10 screw and an M2.5 nut.
4) It looks as the picture shown below
after assembling.
5) Assemble the other forefoot at the same way.
6) Assemble the rocker arm (packaged with the
servo) to the acrylic plate 15, then connect them
by M1.2 x 4mm self-tapping screw.
7) Fasten the self-tapping screw.
Do not over tighten it! Or the screw may be
broken!
SunFounder