User Manual

28
Steering Part
Take out the 1-arm Rocker Arm and the Rocker Arm Screw (a longer one in the servo pack):
Connect the Steering Linkage and the rocker arm with the screw. Note: Insert it into the FIRST
hole of the arm (as indicated by the arrow below) which is the farthest from the gears. Since
the screw is larger than the hole, you should try to screw it hardly so as tight to the arm. Don't
worry of the arm which is soft.
And also fasten them as tightly as possible, and then loosen the screw a little so the Steering
Linkage can move flexibly.