User Manual

20
4.6 U Joint Unit-1/U Joint Unit-2
1. Assemble a type-A U joint with a type-B U
joint perpendicularly as shown below.
Align all the 4 mounting holes in the
middle of the two connector plates.
2. Place them close.
3. Insert two M3*10 screws from the type-A
U joint's side through the middle two
holes in row, and fix them with two M3
nuts on the other side.
4. Tighten the screws. Now a U joint unit
(type-1) is done.
SunFounder