User Manual
34
60 to both motor A and motor B. Click the block then and the two motors turn at 60 speed.
5. Set different values to motor A and motor B, click the block and the two motors will rotate
in different speeds.
6. To stop the motors, just set the speed of both motors as 0:
7. Set the speed value of the two motors to negative and the motor will turn in the opposite
direction::
Future Learning:
There are still many expansion ports on the PiSmart like spi, I2C , UART, USB etc., enabling more
DIY possibilities for you.
In the future tutorials, we'll add more fun projects with sensors, and more blocks will be
complemented in the Dragit also in later versions. Follow our website www.sunfounder.com
for more updates!
If you have any questions or ideas you want to share, visit our FORUM and post anything.
SunFounder