User Manual

19
Before using the hearing function, we need to set a dictionary first. What it does is to "tell" the
PiSmart to recognize the words xxx as the xxx command.
For example, when you say turn on (as called words), the PiSmart can understand it means
on (as deemed command); when you say turn off (words), it knows it's off (commands); when
you say light flashing (words), it knows it's twinkle (commands).
Use these two blocks to set a dictionary: & .
1
．
Drag the two blocks below from PiSmart into the scripting area:
2
．
In the block , enter the words and command. Since I want to use two
commands, duplicate one more block. Enter values for turning off.
3
．
Then put these two blocks into the slot of - click the triangle icon to
add another slot:
SunFounder