User Manual
14
Of course you need to select Dragit; meanwhile we need to use it on PiSmart, so select it too.
Then press Enter to confirm.
Then the program will process the installation. You need to wait for a while, and pay attention not
to disconnect the network during the process.
When the prompt appears as shown above, it means the installation is done. After installation,
reboot:
sudo reboot
On your computer/tablet, open a web browser (Chrome/Firefox/Safari recommended), enter
the IP address of the PiSmart and then 8000:
Example: 192.168.0.177:8000
SunFounder