User Manual

7
Install Arduino IDE
The code in this kit is written based on Arduino, so you need to install the IDE first. Skip it if you
have done this.
Now go to the arduino.cc website and click DOWNLOAD. On the page, check the software
list on the right side under Download the Arduino Software.
Find the one that suits your operation system and click to download. There are two versions
of Arduino for Windows: Installer or ZIP file. You're recommended to download the former.
Just download the package, and run the executable file to start installation. It will download
the driver needed to run Arduino IDE. After downloading, follow the prompts to install. For
the details of installing steps, you can refer to the guide on Learning->Getting Started with
Arduino, scroll down and see Install the Arduino Software.
After installing, you will see Arduino icon on your desk and double click to open it.
Install the Driver
If the driver is not installed, the Nano board will not be able to be recognized by your
computer. Therefore, before using it, please install appropriate driver.
For Windows users, run PL2303_Prolific_DriverInstaller_v1180B in the folder Driver.
For Mac users, refer to the folder PL2303_MacOSX_1_6_1_20170620 in the folder Driver.