User Manual

So far the robot has been assembled successfully, it’s easy if you follow our steps closely.

Hope you enjoy the fun of the bot, thanks for watching.

Q&A

Q1: How can we know the servo is damaged?

A1: In Servo Test step, if the servo rocker arm shake, get stuck or can not rotate smoothly,

with an abnormal sound, we can judge it as a damaged one.

Q2: Why the Sloth reboots in running?

A2:

1) If you use the battery with protection board, the battery protection board will lower the

voltage when the output current is higher than the standard, thus the sloth will reboot.

You can remove the protection board on the battery’s cathode, be careful to operate.

Or choose the battery without protection board.

2) If the Sloth is in lower power, rebooting will happen too. Use a fully-charged battery

(Supply voltage: 6V-8.4V)

3) It coulbe be the servos are lacking for power. Open the program and go to Line 12, 13.

“vel” is the servos rotating speed in “initialization or moving forward”; “vel_Back” is the