Manualshelf

User Manual

ManualsBrandsSunfounder ManualsHumanoid and Biped Robots4-DOF Biped Learning Kit for Arduino Nano
21222324252627282930
27
Align the band edge in the plate with the hollow rivet to mount. Make sure the
band edge side faces inward.
Put two M3 nuts into the holes of the bearing fixing plate and hold them. Then insert two M3*8
Countersunk Screws into the holes of the foot plate and tigten them.
vi. Head Assembly
Assemble the head, insert the ultrasonic module into the ultrasonic fixing plate, and fasten
the module with four M1.4*8 screws and nuts.