Manualshelf

User Manual

ManualsBrandsSunfounder ManualsHumanoid and Biped Robots4-DOF Biped Learning Kit for Arduino Nano
21222324252627282930
23
So you’ll get a bridge-shape part, assemble the other “bridge” in the same way. Make sure
the rocker arms are on the outside of the plate.
iv. Servo INSTALL Test
Connect the upper-right servo to port 9, the yellow cable to the signal pin, red to the positive
pole and brown to the negative pole. Then connect the lower-right servo, the upper-left one
and the lower-left servo to pin 10, 11 and 12 respectively in the same way.