User Manual

22
Fix the other rocker arm onto the other fixing plate in the same way.
Put the 1-arm rocker arm of a servo onto the fixing plate. Align the holes and fasten with two
M1.2*4 self-tapping screws.
Fix the rocker arm of the other lower servo onto the other fixing plate in the same way.
Prepare the following three sets.
Insert the bulges of the ① fixing plate into the concaves of the ③ fixing plate. Keep the rocker
arm outward of the ① plate, put two M3 nuts into the slot of the ① and ② plate. Insert two
M3*8 screws into the holes of both plates and fasten it. Assemble the other lower servo fixing
plate onto the other upper servo plate in the same way.