User Manual

20
How to distinguish the left and right foot: If the curve is at left side, it’s a left foot; if at right, it’s
a right one.
Insert the bulges of the lower servo fixing plate into holes of the right foot plate. Put M3 nuts
in the holes of the fixing plate, insert M3*8 Countersunk Screw into the hole of the foot plate
and tighten it. Fix the other lower servo fixing plate onto the right foot in the same way.
Fix the servo into the lower servo fixing plate with M2*8 screws and M2 nuts, pay attention the
servo shaft should be near the outside of the foot plate namely the curving edge.