User Manual

Assembly

i. Riband Assembly

Before assembling, we define the side with two rectangle slots as the robot head side, place

this side as shown. Check the two sets slant-displayed holes, if they are at right side, the plate

is at front side, then vice versa.

Cut the riband into two pieces nearly equally, and thread them underneath the battery fixing

plate, spare some riband at one end so as to take out the battery with the riband underneath.

You can skip this step if you feel unnecessary.

Fix M3*30 Bi-pass Aluminum Standoffs under the plate with M3*6+6 Single-pass aluminum

standoffs. Note: check the plate is at front side or opposite side.