User Manual

3/1/2018 10.1 Inch Touch Screen for Raspberry Pi - Wiki
http://wiki.sunfounder.cc/index.php?title=10.1_Inch_Touch_Screen_for_Raspberry_Pi 4/13
On the other side, you can see ports for 30-pin LVDS ribbon cable, 6-pin backlight control and 4-pin speaker.
Installation
The screen comes with seven 2.5*14.4 standoffs, two 2.5*22 ones, seven 2.5*6 ones, and some nuts for installing the Raspberry Pi to the screen. Take the
following steps to complete the assembly.
Step 1. Fix the main board to the screen.
Place the main board onto the 4 2.5*6 copper standoffs pre-installed on the back case, with the buttons oriented to the case edge, and align the holes on the
board and the standoffs.
Insert the 2.5*14.4 standoffs into the holes and tighten them.