Owner Manual
2
INSTALLATION
Ensure your solar panel is placed so that
its exposure to the sun is optimized. Be
aware of objects such as trees or property
overhangs that may impede the panel’s
ability to generate a charge.
Optional: Use a power drill (not included) to
create the holes on your chosen mounting
surfaces.
Use 4 of the included wall plugs and screws
to fasten the solar panel to the surface.
1
2
The motion light has two pre-installed mounting clips (A) located on the back of the
light. Slide the light’s mounting clips (A) into the wall bracket’s slots (B). Your light is now
mounted.
Using a power drill (not included), drill the wall bracket onto the chosen mounting surface
with the remaining wall plugs and screws.
• Your motion light is not a toy. Keep it out of reach of small children.
• Your motion light and solar panel are both weather-resistant.
• You can mount your motion light indoors, but your solar panel must be installed outdoors
to receive light from the sun.
• If using a step ladder, you may require a second person to help install the solar motion light.
• Never look directly into the solar motion light when illuminated.
SAFETy INFORMATION
PRODUCT FEATURES
CARE & MAINTENANCE
BATTERy REPLACEMENT INSTRUCTIONS
• From time to time, ensure the plug between the solar panel and light is securely connected.
• It is advisable to adjust the angle of the solar panel to optimize the exposure of the sun during
the winter months.
• The solar panel should be cleaned with a damp cotton cloth on a regular basis. This will ensure
optimal performance and battery charging. Periodically, utilize the same technique to clean the
lenses of the motion lights.
• Never let any abrasive material come into contact with the solar panel.
When replacing the batteries, be sure to:
• USE RECHARGEABLE BATTERIES ONLY.
• Match the replacement battery specications with the batteries that have been removed
• Observe the correct polarity (+ and -) when installing the replacement batteries
• Replace the whole set of batteries at one time. Do not combine old and new batteries together
or those with different specications.
• Mounts on at and corner surfaces
• 50 LEDs per lamp head
• Adjustable motion sensor
• Adjustable time and distance settings
• Solar panel with 4.5 m / 15 ft wire
Step 1 Step 2
A A
B B
B B
3
4
Mounting onto flat surface Mounting onto corner surface
WARRANTy
This product is covered under a one year limited warranty. Sunforce Products Inc. warrants to
the original purchaser that this product is free from defects in materials and workmanship for
the period of one year from date of purchase. The included batteries are not covered under this
warranty.
Proof of purchase including date, and explanation of complaint is required for warranty service.