Owner Manual

2
care & maintenance
• From time to time, ensure the plug between the solar panel and light is securely
connected.
• It is advisable to adjust the angle of the solar panel to optimize the exposure of the sun
during the winter months.
• The solar panel should be cleaned with a damp cotton cloth on a regular basis. This will
ensure optimal performance and battery charging. Periodically, utilize the same
technique to clean the lenses of the motion lights.
• Never let any abrasive material come into contact with the solar panel.
installation
Ensure your solar panel is placed so that
its exposure to the sun is optimized. Be
aware of objects such as trees or property
overhangs that may impede the panel’s
ability to generate a charge.
Optional: Use a power drill (not included) to
create the holes on your chosen mounting
surface.
Use 4 of the included wall plugs and screws
to fasten the solar panel to the surface.
1
2
Insert the two remaining screws and wall
plugs into the surface, leaving 3.2 mm (1/8
in) of space between the screw heads and
the wall. Place the motion light’s mounting
bracket onto the screw heads (1).
Lock the bracket into place by shifting it
horizontally (2).
4
5
3
Place the mounting bracket template (refer
to template shown below or use provided
insert) over the desired mounting surface.
Mark the screw hole locations indicated by
the symbol.
Use a power drill (not included) to drill the
holes on your chosen mounting surface.
2
1
4.45 cm / 1.75 in
mounting BracKet template instructions
1. Cut out the template or use the provided
insert.
2. Mark the screw hole locations ( X ) using a
pencil or drill.
3. Drill holes in the marked locations.
• Your motion light is not a toy. Keep it out of reach from small children.
• Your motion light and solar panel are both weather-resistant.
• You can mount your motion light indoors, but your solar panel must be installed outdoors
to receive light from the sun.
• If using a step ladder, you may require a second person to help install the solar motion light.
• Prior to installation, lay out all components and check against the part list section
in this manual.
• Never look directly into the solar motion light when illuminated.
safety information
When replacing the batteries, be sure to:
• Use rechargeable batteries only.
• Match the replacement battery specications with the batteries that have been removed
• Observe the correct polarity (+ and -) when installing the replacement batteries
• Replace the whole set of batteries at one time. Do not combine old and new batteries together
or those with different specications.
Battery replacement instructions
Warranty
product features
This product is covered under a one year limited warranty. Sunforce Products Inc. warrants to
the original purchaser that this product is free from defects in materials and workmanship for
the period of one year from date of purchase. The included batteries are not covered under
this warranty.
Proof of purchase including date, and explanation of complaint is required for warranty
service.
• 50 LEDs per lamp head
• Adjustable motion sensor
• Adjustable time and distance settings
• Solar panel with 4.5 m / 15 ft wire