Instructions / Assembly

3
Connect the wire from the solar panel to the wire of the light
xture. Your solar motion light will now begin to charge.
Prior to using your solar motion light, the solar panel needs to
be connected to the light for a period of three days. This initial
charge should be done in the OFF position. After the third day,
your included battery will be fully charged and your solar motion
light is ready for operation. Place the light in the ON position.
7
9
6
OFF ON
LUX
TIME
SENS
+ –
The included lithium-ion battery is located in the battery
housing behind the light xture. Select the OFF position on
the light prior to opening the battery housing. Remove the
four screws to reveal the rechargeable battery.
Your solar motion light requires the use of 1 rechargeable
lithium-ion battery.
8
3 different control dials adjust the light’s duration, sensitivity to
light, and sensitivity to motion.
SENS (Sensitivity)
This dial determines the range of motion detection.
TIME (Duration)
This dial sets the duration of illumination time.
LUX (Light level)
This dial tells the sensor the level of darkness that must be
reached before the light turns on.
The sensor will trigger the light to turn on in the daytime.
The sensor will only trigger the light to turn on at dusk or
when it is dark. This is the ideal position for general usage.
LUX
TIME
SENS
OFF ON