APPLICATION GUIDE HRSIW8 OVERVIEW The HRSIW8 amplifier is specifically designed to supply speaker-level power to the HRSIW8 inwall subwoofer. This will produce stunning low frequency effects for your home theater or listening room. This applica$on guide is designed to give you an overview of the amplifier and the subwoofer in a single a dual subwoofer system. For further details, please look at the HRSIW8 amplifier and subwoofer manuals.
APPLICATION #1—Single HRSIW8 subwoofer in a 7 channel surround system HRSIW8 can easily be mounted ver$cally (12 3/16 in wide) in a standard 16 in stud bay or horizontally (24 11/16 Height) if the wall is framed prior to drywall. A single sub can by placed on either side of the display (le? side ver$cal shown below in the top view).
APPLICATION #2—Double HRSIW8 subwoofers in a 7 channel surround system A mul$ple sub applica$on may be required for larger rooms or acous$cally challenging rooms. This will increase overall bass performance and fla)en the room response. It also may present a balanced look with a subwoofer on each side of the screen. When two subwoofer cabinets are used they must be connected to the amplifier in series.
The HRSIW8 Remote: The remote control gives you the ability to easily calibrate the amp/ subwoofer for the room and type of audio you are listening to. Use the DSP display on the front of the amp to view the seDngs during adjustments. Power: Turns the amp on, or puts it into standby mode where it is effec$vely off. Mute: Mutes the subwoofer output Menu Naviga4on/Menu: These controls allow you to navigate within the DSP menus, select parameters, and adjust them up or down through the available op$ons.
