User Instructions

ManualsBrandsSunfield Speaker Box ManualsAudio EquipmentTrue wireless bluetooth headset

NHT 0.2 Instructions (EN)

What’s in the Box:

Overview of controls:

Desired Function

Current status

Operation/result

LED

Prompt

Power-on

Power-off

Touch and hold L and R for 1s.

Red LED will glow for 1s

Tone

Charging

Remove L and R earbud from the case

Red LED will glow for 1s

Tone

Power-off

Power-on

Touch and hold L and R for 3s.

Red LED will glow for 1s

Tone

Place L and R into case,

Auto power-off, and charging.

Red LED will glow for 1s

Remove pairing record

Power-off

Touch and hold L and R for 10s.

White and Red LED

will alternate 3 times

in succession

Answer call/Hang up

Incoming call/in call

Tap L or R once.

Tone

Reject call

Incoming call

Touch and hold L or R for 1s.

Tone

Voice assistant

Standby mode

Touch and hold L or R for 1s，Activate voice

control.

Tone

Mute on/off

Calling

Double tap L or R.

Tone

Music pause/play

Music playing

Tap L or R once

Next track/Previous

track

Music playing

Double tap L, Previous track/

Double touch R, Next track.

Switch call to earbud

Talk on cellphone

Touch and hold L or R for 1s.

Switch call to cellphone

Talk on earbuds

Touch and hold L or R for 2s.

Fig. 1

Summary of content (4 pages)

PAGE 1
NHT 0.2 Instructions (EN) What’s in the Box: Fig. 1 Overview of controls: Desired Function Power-on Power-off Current status Operation/result LED Prompt Power-off Touch and hold L and R for 1s. Red LED will glow for 1s Tone Charging Remove L and R earbud from the case Red LED will glow for 1s Tone Touch and hold L and R for 3s. Red LED will glow for 1s Tone Red LED will glow for 1s / Power-on Place L and R into case, Auto power-off, and charging.
PAGE 2
NHT 0.2 Instructions (EN) How to Use your NHT 0.2 Wireless Earbuds Pairing for the first time: 1. Pick up earbuds from Charging Case. 2. The left and right earbuds will automatically enter pairing mode. 3. Search for “NHT 0.2 Wireless Earbuds” and pair with your device accordingly. Switch Paired Device: 1. Turn off Device A’s Bluetooth function; earbuds will automatically disconnect and enter pairing mode. 2. On Device B, Search for “NHT 0.2 Wireless Earbuds” and connect accordingly.
PAGE 3
NHT 0.2 Instructions (EN) To charge Earbuds: Place earbuds into Charging Case to charge. The earbuds will automatically turn off and start charging. LEDs will glow solid red during charging and turn off after fully charged. To charge Charging Case: Charge Charging Case via USB cable. LED will blink white while charging and turn solid white once fully charged. Charging Case battery capacity display (under standby mode): Press button; if battery capacity is less than 5%, red LED will blink for approx. 18s.
PAGE 4
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.