User guide

4940B 2 09/29/11
WARNING
WARNING
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible
injury or death.
IMPORTANT: READ THESE INSTRUCTIONS BEFORE OPERATING
BEFORE USING THIS DEVICE, READ THIS MANUAL COMPLETELY AND THOROUGHLY, UNDERSTAND ITS OPERATING
PROCEDURES, SAFETY WARNINGS AND MAINTENANCE REQUIREMENTS.
It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is also the responsibility of the
device owner to keep this manual intact and in a convenient location for all to see and read. If the manual or product labels are lost or not
legible, contact Sunex for replacements. If the operator is not fluent in English, the product and safety instructions shall be read to and dis-
cussed with the operator in the operator's native language by the purchaser/owner or his designee, making sure that the operator compre-
hends its contents.
THE NATURE OF HAZARDOUS SITUATIONS
The use of Portable Hydraulic Power Kits is subject to certain hazards that cannot be prevented by mechanical means, but only by the exer-
cise of intelligence, care, and common sense. The versatility of use is limited only by the imagination and ingenuity of its operator; therefore
Sunex cannot be responsible for product damage or personal injury due to faulty operator judgement or improper use of the kit. It is es-
sential to have personnel involved in the use and operation of the kit who are careful, competent, trained, and qualified in the safe operation
of the kit and its proper use when working on vehicle frames and body parts. Examples of hazards are dropping or slipping of load, caused
by improperly securing loads, overloading, off centered loads, and improper setups. Additional hazards may be caused by the rupture or
bursting of the hydraulic hoses and related fittings due to abuse, misuse, improper setup and using the kit for a purpose for which it was not
intended.
METHODS TO AVOID HAZARDOUS SITUATIONS
• Study,understand,andfollowallinstructionsbeforeoperatingthisdevice.
• ThekitownerisresponsibleforthekitbeingusedinaccordancewithOSHA,state,andlocalsafetystandards.
• WeareyeprotectionthatmeetsANSIZ87.1andOSHAstandards.
• Donotexceedtheratedcapacity.Somekitattachmentsdonotmatchthekit’sratedcapacityandthekit’sratedcapacitycanalsobe
reduced according to the number of kit attachments and extension tubes used and their assembly to the cylinder/ram. Please refer to the
Owner’sManualsectiontitledAPPLYINGFORCEfortypicalapplicationsandcorrespondingloadcapacities.
USE THE FORCE GAUGE INCLUDED IN THIS KIT TO MONITOR CORRECT LOAD CAPACITIES.
Wedge Rams are rated at 1 ton capacity.
Rubber Heads are rated at 1 ton capacity in the 10 ton kit.
• Donotoverextendtherams.
• Whenusingextensiontubes,positiontheshortesttubefarthestawayfromthecylinder.
• Attachmentsandextensiontubesmustbealignedandfullyengagedsotheramforceisstraightandavoidsoff-centerloadconditions.
• Beforeoperatingtightenallhose,gaugeandmanifoldconnectionssotheyaresecureandleakfree.Donotovertightenoritmaycause
premature thread failure or split pressure fittings. Tighten all hose quick disconnect fittings by hand only.
• Donotsubjectthehosetoextremeheatorcold,sharpsurfaces,abrasion,impact,kinking,twisting,curling,bendingoranyconditionthat
restricts or affects fluid flow.
• Makesuresetupisstableandsecurebeforeperforminganywork.
• Usethiskitfortheintendedpurposeofvehiclebody/framerepaironly.
• Onlycomponentssuppliedwiththiskitshallbeusedwiththiskit.
• Noalterationsormodicationsshallbemadetoanyofthekitcomponents.
• Failuretoheedthesewarningsmayresultinpersonalinjury,propertydamage,orboth.
CONSEQUENCES OF NOT AVOIDING HAZARDOUS SITUATIONS
Failure to read this manual completely and thoroughly, failure to understand its OPERATING INSTRUCTIONS, SAFETY WARNINGS,
MAINTENANCEINSTRUCTIONSandcomplywiththem,andfailuretocomplywiththeMETHODSTOAVOIDHAZARDOUSSITUATIONS
could cause accidents resulting in serious or fatal personal injury and/or property damage.
WARNING: Indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
WARNING
WARNING
WARNINg INFORMATION