User Manual

100.0°
137.0°
123.0°
Step 5 Adjust the lens focal length and video angle range.
1.Press the arrows marked on the lining to remove the
lining aside, as shown in figure 3-3.
Figure 3-1 Opening camera
Figure 3-3 Removing lining
Large Dome
Figure 3-5 Adjusting lens
4.3 Browsing Video
To ensure the real-time video can be played properly, you must
perform the following operation when you log in the web for the first
time:
Figure 4-3 Adding a trusted site
Step 2 In the Internet Explorer, choose Tool > Internet Options >
Security > Customer level, and set Download unsigned
ActiveX control and initialize and script ActiveX controls not
marked as safe for scripting under ActiveX controls and
plug-ins to Enable, as shown in figure 4-4.
Step 3 Download and install the player control as prompted.
If the repair tips displayed when installing the control , please
ignore the prompt, and continue the installation, the login page is
displayed when the control is loaded.
Step 1 the Internet Explorer. Choose Tools > Internet options >
Security > Trusted sites > Sites, in the display dialog box, click
Add, as shown in figure 4-3.
To browse a real-time video, click Live Video. The Live Video
page is displayed, as shown in figure 4-5.
Figure 4-5 Live Video
Figure 4-4 Configuring ActiveX control and plug-in
NOTE
4.1 Login
Step 1 Open the Internet Explorer, enter the IP address of IP camera
(default value: 192.168.0.120) in the address box, and press
Enter. The login page is displayed as shown in figure 4-1.
Step 2 Input the user name and password.
Ÿ The default user name is admin. The default password is admin.
Change the password when user logs into the system for first time to
ensure system security.
Ÿ It is advised to restart the device three minutes later after modifying
password to ensure modified successfully.
Ÿ You can change the system display language on the login page.
NOTE
Step3 Click Login, the main page is displayed.
4.2 Modify IP address
Choose Configuration > Device > Local Network, the Local
Network page is displayed.
Enter the IP address in the IP Address box and click Apply as shown
in figure 4-2.
After the IP address is set successfully, please use the new IP
address to log in the Web interface.
Figure 4-2 Local Network
User Name
Password
English
Figure 4-1 Login
Quick Configuration(e.g IE)
4
Step 4 Connect the network access port and power supply of the
multi-head cable.
Installation Steps:
Step 1 Use the T screw driver in the accessory package to
unscrew the three screws on the dome cover. The camera
is opened, as shown in figure 3-1.
The vandal dome camera can be installed in the ceiling , wall ,
wall bracket or ceiling bracket. This section describes how to
install the camera in the ceiling.
WARNING
To avoid moisture influence, install the dome cover at least
half an hour after the camera is installed and powered on.
3
Device Installation
Step 2 Stick the Installation location sticker on the ceiling or wall.
Drill three holes based on the marks on the sticker. Drive
the plastic anchors into the holes.
Step 3 Fetch three black self-tapping screws from the accessory
package. Then fix the screws to fasten the camera on the
ceiling as shown in figure 3-2.
Mini Dome
Figure 3-2 Installing housing
The side
routing
Plastic
anchors
Top
routing
Self-
tapping
screws
Mini dome
Arrows
lining
lining
Large dome with lining
Mini dome
Step 6 Loosen the focus lever, and gently move the zoom lever to
adjust the lens focal length to the desired position. Move
the focus lever slightly to focus the lens clearly. Tighten the
focus lever after completing the focusing operation, as
shown in figure 3-4(This step is only applied for large
dome).
Figure 3-4 Three-axis adjustment
Vertical
rotating 0°~75°
Lens axis
rotating
0°~350°
Horizontal
rotating
0°~350°
Screw
Mini dome
NOTE
Figure3-7 Assembling lining and cover
Step 7 Assemble the lining with the main body and buckle the
four button placements with the main body bracket. Aim
the two screws hole with boss at the groove on the main
body. Then fasten the dome cover , as shown in figure 3-6.
lining
Four
buttons
cover
T15 screwdriver
Large dome
Mini dome
T10 screwdriver
two
buttons
Insert
SD card
Figure 3-6 Installing SD card
40
19.3
112.24
Insert
SD card
Mini dome
Horizontal
rotating
350°
Vertical
rotating 80°
Lens axis
rotating
350°
Large dome
Large dome
φ123.18
φ130
Local Network
Netw ork card ID
IP Pro to col
DHCP
IP Add re ss
Subn et Mask
Defa ult Gateway
Pref er red DNS Serve r
Alte rn ate DNS Serve r
MTU( 12 80-1500)
Refresh
Apply
1
IPv4
192.168.0.120
255.255.255.0
192.168.0.1
192.168.0.1
192.168.0.2
1500
http://192.168.0.120
Live Vi de o
Playback
Personnel Count
Configuration
Not e: Activ eX is bei ng used t o play li ve vide o now
Swi tch to VL C, then p lay the v ideo
Swi tch to Pl ugin, t hen pla y the vid eo
Strea m
str eam 1
1
2
4.4 Intelligent Analysis
At "Configuration > Intelligent Analysis" interface, user can set the
parameters of Perimeter, Single Virtual Fence, Double Virtual Fence,
Multi Loiter, Converse and Personnel Count, as shown in figure 4-7 .
Figure 4-7 Intelligent Analysis
Live Video
Playb ack
Perso nne l Co unt
Confi gur at ion
Dev ice Inf o
Str eam
Dev ice
Ext ernal D evice
Int ellig ent Anal ysis
Per imete r
Sin gle Vir tua l Fen ce
Dou ble Vir tua l Fen ces
Mul ti Loit er
Con verse
Per sonne l Count
Ala rm
AI Mu ltiob ject
Dev ice Rec ord
Pri vacy Ma sking
Net work Se rvice
Pri vileg e Manag er
Pro tocol
Dev ice Log
Loc al Conf ig
Mai ntena nce
Per imete r
Ena ble
Sen sitiv ity
Out put Cha nnel
Ala rm Reco rd
SMT P
FTP U plo ad
Cle ar
Ref resh
App ly
Sun
4.4 AI Multi object
At “Configuration > AI Multi object” interface, user can enable face
detection, full body detection, vehicle detection, set the other
parameters of detection.
1 Personnel Count: User can query the data of personnel count,
through year, month, day. The statistics can be downloaded. The
data can be shown by line chart, histogram, list.
2 AI Live video: Click the icon to view the snapshots of human face
or license plate (click “Face” or “Plate” to switch ).
The bottom page will show the captured images of vehicle and
human face.
A
B
Pedestrian direction
15°
If user requires higher accuracy of
personnel count, we recommend
the user to install camera and draw
the line following as figure 4-6.
For better capture performance, it
is recommended to use 6mm focus
length lens or above.
Figure 4-6 Installation of personnel count
CAUTION
Installing on bracket
Phillips stainless screws
2.View the video, loosen the slotted screw slightly as
shown in figure 3-4 & figure 3-5, make camera's triaxial
adjustments, adjust the screen to the scene you want to
monitor, and then tighten the screws. Three-axis
adjustment direction and angle are shown in figure 3-4
and figure 3-5.
Ÿ Some models maybe not operate so much steps; Please refer to
the actual product.
Ÿ While focusing lever is in the process of focusing, an image might
be blur, move the zoom lever to fine-tune the image, when image is
clear, lock the zoom lever.
Ÿ If the lens of camera is auto focus lens, set the focus value in
Sensor > Lens control page in the web page.
Installing directly
If user want to install large dome on bracket or
junction box, you must fetch three phillips
stainless screws in the accessory to fix the
camera, so that can achieve the waterproof
effect. As shown in figure 3-2.