User manual

INTRODUCTION
Congratulations! You have purchased one of the most efficient refrigeration products available on the
market today. The SunDanzer
®
chest freezers and chest refrigerators are designed to provide years of
efficient trouble-free operation. The design is optimized for energy savings with an efficient DC
compressor, thick insulation, and a chest style configuration.
Before using the appliance, please read through this manual. Be safe using common sense and caution
when handling this electrical appliance.
IMPORTANT NOTES
● THIS APPLIANCE SHOULD BE LEFT OFF IN ITS NORMAL OPERATING POSITION
FOR 2
HOURS PRIOR TO TURNING ON TO ALLOW THE COMPRESSOR OIL TO SETTLE.
● IF THE APPLIANCE HAS BEEN HANDLED ON ITS SIDE OR STANDING ON END, IT
SHOULD BE ALLOWED TO SIT IN THE NORMAL OPERATING POSITION FOR 12
HOURS BEFORE TURNING ON.
● THIS APPLIANCE OPERATES ON 12 VOLT DC (DIRECT CURRENT) ONLY! DO
NOT CONNECT DIRECTLY TO AN AC (ALTERNATING CURRENT) POWER
SOURCE.
● NEVER USE EXCESSIVE FORCE ON THE HANDLE TO OPEN THE LID.
● BEFORE
CLEANING ALWAYS DISCONNECT FROM THE ELECTRICAL POWER
SUPPLY.
INSTALLATION
Positioning of Refrigerator
The area in which the appliance is to be installed must be relatively cool, dry, and suitably ventilated. The
area must be protected against hard rain and kept free of dust. To ensure proper function, the appliance
must be placed horizontally on a flat, firm, and stable surface resting level on all four supports. Use wood
or metal shims to level the appliance if necessary. Do not place the appliance close to heat sources (stove,
boiler, chimney, etc). Exposure to sunlight will hinder performance. Allow adequate space between the
appliance and neighboring walls or large objects. A minimum spacing of 7.5cm (3 inches) is
recommended.
ELECTRICAL DC CONNECTION
Fuse: Recommended use of a 15A fuse in the line serving the DCR160-E
Wire size: Recommended service wire size 10 AWG up to 50 ft.