Instructions / Assembly

Attach left and right arm

rest (A1&A2) to seat base (C)

using M6 x 18 socket head cap

screw (F) and washer (H) as

shown. Do this in four places.

Loose attach all connections at the

beginning, adjust alignments then

fully tighten all joints

ROCKING BENCH GLIDER

F09B602 & F09B606 & F09B610

Page 1 of 3

PAGE 1
Page 1 of 3 F09B602 & F09B606 & F09B610 ROCKING BENCH GLIDER Attach left and right arm rest (A1&A2) to seat base (C) using M6 x 18 socket head cap screw (F) and washer (H) as shown. Do this in four places.
PAGE 2
Page 2 of 3 F09B602 & F09B606 & F09B610 ROCKING BENCH GLIDER Attach seat back (B) to left and right arm rest (A1&A2) using M6 x 40 socket head cap screw (G) and washer (H) in four places as shown. Connect seat back (B) to seat base (C) using M6 x 18 socket head cap screw (F) and washer (H). Flip over the assembly. Attach linkage rod (D) to left and right arm rest (A1&A2) through the upper holes using M6 x 40 socket head cap screw (G), washer (H) and plastic washer (J) as shown.
PAGE 3
Page 3 of 3 F09B602 & F09B606 & F09B610 ROCKING BENCH GLIDER With the assembly still flipped, attach chair base (E) to linkage rod (D) through the lower holes using M6x40socket head cap screw (G), washer (H) and plastic washer (J) as shown.