User's Manual

42 WDCT45-A2 Base Settings
R0
HANDSET PRIORITY
Information
Normally, if you have more
than one handset
registered to your base,
they all ring at the same
time. However, you can
set one of them to ring
before the others, so that
calls can always be
answered at one handset
first.
Protecting your settings
When entering a PIN the
digits are shown as
asterisks.
Keep track of your PIN
If you change the System
PIN, keep a record of the
new number by writing in
the space provided on the
last page. You need your
System PIN for registering
handsets and for some
other optional settings.
If you enter the PIN
incorrectly the screen
shows Incorrect Pin.
Handset Priority
To set the handset ringing priority:
1. Press Menu then scroll
to Base
Settings and press OK. Press
to highlight Handset Priority then
press OK. Display highlights All
Handsets.
2. Press OK to select All Handsets to
make all handsets ring together.
Or
Scroll
to Select Handset and
press OK. Scroll
or
to the
handset you want to ring first. Press
OK.
3. Scroll
or
to select the
number of rings at the handset before
the other handsets start ringing. Press
OK to confirm.
System PIN
The System PIN is used for registering and
deregistering handsets and some other
optional settings.
The default System PIN is 0000.
1. Press Menu then scroll
to Base
Settings and press OK. Press
to highlight System PIN then press
OK.
2. Enter the current PIN (Default setting
0000) and press OK.
3. Enter the new PIN and press OK.
Confirm New PIN is displayed.
4. Enter your new PIN again and press OK
to confirm.